If all the PCBs and components have been received, it's time to solder the components onto the PCBs!
Here are the steps to solder everything in the right place, and in the right order. Each PCB has its own soldering guide, which you can find below.
The TNY-360 contains 10 custom PCBs. Here's a list of the boards you'll have to solder, ordered from the simplest to the most complex one.
The first and simplest PCB you'll need to solder.
The PCB responsible for distributing battery power to your TNY-360.
The PCB that controls the motors, and plugs into the backbone.
The PCB that reads position feedback, and plugs into the backbone.
The PCB that measures your TNY-360's orientation, and plugs into the backbone.
The PCBs that detect contact with the ground, placed in the feet.
The central PCB that powers your TNY-360 brain with its ESP32-S3.
The PCB used for the TNY-360's front visor, which holds the screen.
The PCB that gathers and routes signals from all the components of your TNY-360.
The PCB that converts battery power to the required robot's voltages.