Welcome on the TNY-360 Practical Guide !
This section is designed to help you get started with your TNY-360, regardless of your experience level and the type of TNY-360 kit you have (even if you don't have one at all).
This practical guide is organised into three main sections. Depending on the type of kit you have, you may want to start at a different point in the guide:
Fabrication - For those who have the Maker kit and need guidance for printing the parts.
Assembly - For those who have the Adventurous kit and need help with the assembly process.
Startup & Setup - For those who have the Ready-to-Run kit and want to get started with their TNY-360.
For people wanting to build your TNY-360 from scratch, you might want to start reading the Sourcing & Preparation section, which will list all the components and tools you need to build a TNY-360.
Sourcing & Preparation - If you want to build your TNY-360 from scratch.
Lithium-Polymer (LiPo) batteries present serious dangers, including the output of high currents and a severe risk of fire if mishandled or punctured. Always handle, charge, and store your power source with extreme caution.
The standard TNY-360 kit is supplied without a battery. We recommend using a standard RC 3S LiPo battery with an XT30 connector.
Alternatively, your specific kit may have been shipped with an experimental prototype battery pack.