Sourcing & Preparation

This is where your journey begins ...

Hello and welcome to the TNY-360 Sourcing & Preparation Guide !

This section is designed for those who want to build their TNY-360 from scratch.
Here, you will find detailed instructions on how to source all the necessary components, flash the firmware onto the microcontroller, and prepare for the fabrication and assembly phases.

Here's a quick breakdown of what you'll find in this section:

• Component Sourcing
  You'll learn how to source all the electronic and mechanical components needed for the TNY-360.
• PCB Ordering
  You'll learn how to order the printed circuit boards for the TNY-360 along with the necessary components to solder on them.
• PCB Soldering
  You'll see what components need to be soldered on each PCB, where to solder them, and how to do it.
• Firmware Flashing
  You'll learn how to flash the firmware onto the microcontroller using the recommended tools and settings.

Ready to start ? Let's dive into the sourcing and preparation process !